GetFPV
QAV400 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV400 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 36 grams,
DetailsGetFPV
QAV500 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV500 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 50g,
DetailsGetFPV
FATSHARK 5.8GHZ 100MW TRANSMITTER MODULE
| True output power | 100mw |
GetFPV
IMMERSIONRC EZANTENNA TRACKER
| Power Requirements | 5-7.4v DC, ~65 mA |
GetFPV
QAV400 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV400 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 36 grams,
DetailsGetFPV
QAV500 "DIRTY FRAME" PLATE
This is the 'dirty frame' plate for the QAV500 FPV Quadcopter Frame. It holds the motor arms and ESCs. This plate does not have any power soldering pads. Weight: 50g,
DetailsGetFPV
1.3GHZ 1500MW TRANSMITTER
| Channel d | 1258MHZ |
| Channel 9 | 1280MHZ |
| Channel 4 | 1080MHz |
| Channel 5 | 1120MHz |
| Channel 6 | 1160MHz |
| Channel 7 | 1200MHz |
| Channel 8 | 1240MHz |
| Channel 9 | 1280MHz |
| Channel H | 1320MHz |
| Channel C | 1360MHz |
| Channel d | 1258MHz |
This is a very powerful 1.5w transmitter. Weighs 88g with case. The case functions as a heat sink so if removed you need to ensure you have good airflow to cool the TX. Bare module dimensions: 70*37*7mm,
Details If you are shipping to the US, you MUST ...GetFPV
QAV400 FPV QUADCOPTER FRAME ARF
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2250mah 4s lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 10 minutes hover with Lumenier 2250mAh 4s, 12-15 minutes on Lumenier 4s 3300mAh |
| Body | G10 |
| Booms | Anodized machined Aluminum |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as the FPV electronics, Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
FRSKY XJT 16CH RADIO TRANSMITTER MODULE - JR/GRAUPNER TYPE
| Operating Voltage Range | 6.0V-15.0V |
| Operating Current | 140mA (@6V), 80mA (@12V) |
| Output Power | ≤ 100mW |
Features:, Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments., Compatibility:, V8 Series:, (Non-Telemetry receivers), D Series:, (Telemetry receivers), X Series:, (Telemetry receivers), LR Series:, (Long Range receivers), Compatible with the following transmitters:, JR:347, 388, 783, Specifications:,
Details The XJT telemetry transmitter module is compatible with the ...GetFPV
FRSKY DF 2.4GHZ COMBO PACK FOR FUTABA W/ MODULE & RX
| Futaba | 3PM, 3PK, 7U, 8U, 9C, 10C, 9Z, FN-Series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7 |
| WFLY | WFT09, WFT-08 |
| Operating voltage | 3.5 - 10.0V |
| Power consumption | 100mA |
| Resolution | 3072 |
| Latency | 22ms |
| Analog voltage | 0~3.3V |
| Range | 1.5km-2.5km |
| Dimensions | 55 x 25 x 14 mm |
| Weight | 12.4g |
| Version | 2.0 |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 58.5x37.5x22mm |
| Version | 2.0 |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., V8FT:, Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,
Details FrSKY ACCST technology is proven, approved by many model ...GetFPV
FRSKY DJ 2.4GHZ COMBO PACK FOR JR W/ MODULE & RX
| Operating voltage | 3.5 - 10.0V |
| Power consumption | 100mA |
| Resolution | 3072 |
| Latency | 22ms |
| Analog voltage | 0~3.3V |
| Range | 1.5km-2.5km |
| Dimensions | 55 x 25 x 14 mm |
| Weight | 12.4g |
| Version | 2.0 |
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 63.9x48.5x36.5mm |
| Version | 2.0 |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., FrSky DJTis compatible with JR transmitters following:, JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, PX, 9XII, 11XZERO, Turnigy 9x., Receiver Specification:, Number of channels: 8, Module specification:, Output Power:: 60mW,
Details FrSKY ACCST technology is proven, approved by many model ...GetFPV
QAV500 FPV QUADCOPTER FRAME V1.2
| NOTE | Landing Gear not included! |
GetFPV
OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)
| These videos were flown with a QAV400 and CC3D. Pilots | MidwestRob and |
| 3-axis Gyroscope array and 3-axis Accelerometer | MPU-6000 |
| Supports several common RC inputs | 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers |
| ReceiverPort functions (configurable) | 6 PWM input channels or combined PPM stream, 4 PWM output channels |
| MainPort functions (configurable) | serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites |
| FlexiPort (configurable) | serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) |
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,
Details PLEASE NOTE!!! If you're in the US and choose ...GetFPV
DJI FLAMEWHEEL F550 BASIC KIT
,
Details This frame has been developed for entertainment, aerial photography, ...GetFPV
DJI FLAMEWHEEL F550 ARF KIT
,
Details This frame has been developed for entertainment, aerial photography, ...